Cluster Bandwidth Utilization Alarm
This alarm is applicable to the Media Transcoding Cluster feature (Mediant 9000 and
acClusterBandwidthAlarm
Alarm |
acClusterBandwidthAlarm |
||||||||
---|---|---|---|---|---|---|---|---|---|
OID |
1.3.6.1.4.1.5003.9.10.1.21.2.0.126 |
||||||||
Description |
The alarm is sent when the bandwidth utilization of a Cluster interface exceeds the configured maximum bandwidth (refer to the MtcClusterNetworkMaxBandwidth parameter). |
||||||||
Default Severity |
Minor |
||||||||
Source Varbind Text |
Board#1/EthernetLink#<ethernet port number> |
||||||||
Event Type |
Other |
||||||||
Probable Cause |
performanceDegraded
|
||||||||
Severity |
Condition |
Text |
Corrective Action |
||||||
Major |
Bandwidth utilization is greater than 90%. |
"Cluster Bandwidth is above 90% utilization on Interface name: <name>. No more transcoding sessions will be allocated on that Cluster Interface" |
Reduce the number of Media Components on the Cluster interface. Alternatively, the overall permitted bandwidth for the Cluster interfaces should be increased, if possible, using the ini file parameter [MtcClusterNetworkMaxBandwidth]. |
||||||
Minor |
Bandwidth utilization is between 85 and 90%. Note: If a Major alarm was sent and the bandwidth later declined to between 80 and 85%, the alarm is changed to Minor. |
"Cluster Bandwidth is above 85% utilization on Interface name: <name>" |
|||||||
Cleared |
Bandwidth utilization is less than 80%. |
- |
- |